- Home
- Find Gizmos
- Browse by Standard (USA)
- South Dakota Standards
- Mathematics: 5th Grade
Texas - Mathematics: 5th Grade
Tested State Standards | Adopted: 2014
MP: : These student expectations will not be listed under a separate reporting category. Instead, they will be incorporated into test questions across reporting categories since the application of mathematical process standards is part of each knowledge statement.
MP.5.1: : The student uses mathematical processes to acquire and demonstrate mathematical understanding.
MP.5.1.C: : select tools, including real objects, manipulatives, paper and pencil, and technology as appropriate, and techniques, including mental math, estimation, and number sense as appropriate, to solve problems;
Multiplying Decimals (Area Model)
Model the product of two decimals by finding the area of a rectangle. Estimate the area of the rectangle first. Then break the rectangle into several pieces and find the area of each piece (partial product). Add these areas together to find the whole area (product). 5 Minute Preview
MP.5.1.D: : communicate mathematical ideas, reasoning, and their implications using multiple representations, including symbols, diagrams, graphs, and language as appropriate;
Fraction, Decimal, Percent (Area and Grid Models)
Model and compare fractions, decimals, and percents using area models. Each area model can have 10 or 100 sections and can be set to display a fraction, decimal, or percent. Click inside the area models to shade them. Compare the numbers visually or on a number line. 5 Minute Preview
Graphing Skills
Create a graph (bar graph, line graph, pie chart, or scatter plot) based on a given data set. Title the graph, label the axes, and choose a scale. Adjust the graph to fit the data, and then check your accuracy. The Gizmo can also be used to create a data table based on a given graph. 5 Minute Preview
MP.5.1.E: : create and use representations to organize, record, and communicate mathematical ideas;
Fraction, Decimal, Percent (Area and Grid Models)
Model and compare fractions, decimals, and percents using area models. Each area model can have 10 or 100 sections and can be set to display a fraction, decimal, or percent. Click inside the area models to shade them. Compare the numbers visually or on a number line. 5 Minute Preview
Graphing Skills
Create a graph (bar graph, line graph, pie chart, or scatter plot) based on a given data set. Title the graph, label the axes, and choose a scale. Adjust the graph to fit the data, and then check your accuracy. The Gizmo can also be used to create a data table based on a given graph. 5 Minute Preview
1: : The student will demonstrate an understanding of how to represent and manipulate numbers and expressions.
1.5.2: : The student applies mathematical process standards to represent, compare, and order positive rational numbers and understand relationships as related to place value.
1.5.2.A: : represent the value of the digit in decimals through the thousandths using expanded notation and numerals;
Comparing and Ordering Decimals
Use grids to model decimal numbers and compare them graphically. Then compare the numbers on a number line. 5 Minute Preview
Modeling Decimals (Area and Grid Models)
Model and compare decimals using area models. Set the number of sections in each model to 1, 10, or 100, and then click in the models to shade sections. Compare decimals visually and on a number line. 5 Minute Preview
Modeling Whole Numbers and Decimals (Base-10 Blocks)
Model numbers with base-10 blocks. Drag flats, rods, and individual cubes onto a mat to model a number. Blocks can be exchanged from one area of the mat to the other. Four sets of blocks are available to model a variety of whole numbers and decimals. 5 Minute Preview
Treasure Hunter (Decimals on the Number Line)
Drive a desert highway searching for buried treasure. Learn to use the car's tens, ones, tenths, and hundredths gears, along with a GPS system (number line), to find the right place to dig. Plot your findings on a zoomable number line map. Can you become a master Treasure Hunter? 5 Minute Preview
1.5.2.B: : compare and order two decimals to thousandths and represent comparisons using the symbols >,
Comparing and Ordering Decimals
Use grids to model decimal numbers and compare them graphically. Then compare the numbers on a number line. 5 Minute Preview
Modeling Decimals (Area and Grid Models)
Model and compare decimals using area models. Set the number of sections in each model to 1, 10, or 100, and then click in the models to shade sections. Compare decimals visually and on a number line. 5 Minute Preview
Modeling Whole Numbers and Decimals (Base-10 Blocks)
Model numbers with base-10 blocks. Drag flats, rods, and individual cubes onto a mat to model a number. Blocks can be exchanged from one area of the mat to the other. Four sets of blocks are available to model a variety of whole numbers and decimals. 5 Minute Preview
Treasure Hunter (Decimals on the Number Line)
Drive a desert highway searching for buried treasure. Learn to use the car's tens, ones, tenths, and hundredths gears, along with a GPS system (number line), to find the right place to dig. Plot your findings on a zoomable number line map. Can you become a master Treasure Hunter? 5 Minute Preview
1.5.4: : The student applies mathematical process standards to develop concepts of expressions and equations.
1.5.4.A: : identify prime and composite numbers;
Chocomatic (Multiplication, Arrays, and Area)
Use the Chocomatic to design candy bars made out of chocolate squares. Use multiplication to find the number of squares in each chocolate bar. Build collections of chocolate bars that all have the same number of squares. Solve multiplication problems by joining two smaller chocolate bars into a large bar. 5 Minute Preview
Factor Trees (Factoring Numbers)
The Factor Trees Gizmo has two modes. In Factor mode, you can create factor trees to factor composite numbers into primes. In Build mode, you can build numbers by multiplying primes together. Can you build all composite numbers up to 50? Any whole composite number up to 999 can be factored or built with the Gizmo. 5 Minute Preview
1.5.4.E: : describe the meaning of parentheses and brackets in a numeric expression; and
Order of Operations
Select and evaluate the operations in an expression following the correct order of operations. 5 Minute Preview
1.5.4.F: : simplify numerical expressions that do not involve exponents, including up to two levels of grouping.
Order of Operations
Select and evaluate the operations in an expression following the correct order of operations. 5 Minute Preview
2: : The student will demonstrate an understanding of how to perform operations and represent algebraic relationships.
2.5.3: : The student applies mathematical process standards to develop and use strategies and methods for positive rational number computations in order to solve problems with efficiency and accuracy.
2.5.3.A: : estimate to determine solutions to mathematical and real-world problems involving addition, subtraction, multiplication, or division;
Adding Whole Numbers and Decimals (Base-10 Blocks)
Use base-10 blocks to model two numbers. Then combine the blocks to model the sum. Blocks of equal value can be exchanged from one area of the mat to the other to help understand carrying when adding. Four sets of blocks are available to model different place values. 5 Minute Preview
Critter Count (Modeling Multiplication)
Use groups of critters on leaves to model multiplication as repeated addition. Change the expression to change the number of groups or the number of critters per group. Display the critters either on leaves or as a rectangular array. 5 Minute Preview
Multiplying Decimals (Area Model)
Model the product of two decimals by finding the area of a rectangle. Estimate the area of the rectangle first. Then break the rectangle into several pieces and find the area of each piece (partial product). Add these areas together to find the whole area (product). 5 Minute Preview
Subtracting Whole Numbers and Decimals (Base-10 Blocks)
Use base-10 blocks to model a starting number. Then subtract blocks from this number by dragging them into a subtraction bin. Blocks of equal value can be exchanged from one section of the mat to the other to help understand regrouping and borrowing. Four sets of blocks are available to model different place values. 5 Minute Preview
2.5.3.C: : solve with proficiency for quotients of up to a four-digit dividend by a two-digit divisor using strategies and the standard algorithm;
No Alien Left Behind (Division with Remainders)
The alien school children from the planet Zigmo travel to distant planets on a field trip. The goal is to select a bus size so that all buses are full and no aliens are left behind. This is a nice illustration of division with remainders. 5 Minute Preview
2.5.3.D: : represent multiplication of decimals with products to the hundredths using objects and pictorial models, including area models;
Multiplying Decimals (Area Model)
Model the product of two decimals by finding the area of a rectangle. Estimate the area of the rectangle first. Then break the rectangle into several pieces and find the area of each piece (partial product). Add these areas together to find the whole area (product). 5 Minute Preview
Multiplying with Decimals
Multiply two decimals using a dynamic area model. On a grid, shade the region with width equal to one of the decimals and height equal to the other decimal and find the area of the region. 5 Minute Preview
2.5.3.E: : solve for products of decimals to the hundredths, including situations involving money, using strategies based on place-value understandings, properties of operations, and the relationship to the multiplication of whole numbers;
Multiplying Decimals (Area Model)
Model the product of two decimals by finding the area of a rectangle. Estimate the area of the rectangle first. Then break the rectangle into several pieces and find the area of each piece (partial product). Add these areas together to find the whole area (product). 5 Minute Preview
Multiplying with Decimals
Multiply two decimals using a dynamic area model. On a grid, shade the region with width equal to one of the decimals and height equal to the other decimal and find the area of the region. 5 Minute Preview
2.5.3.H: : represent and solve addition and subtraction of fractions with unequal denominators referring to the same whole using objects and pictorial models and properties of operations;
Adding Fractions (Fraction Tiles)
Add fractions with the help of the Fractionator, a fraction-tile-making machine in the Gizmo. Model sums by placing the tiles on side-by-side number lines. Explore the usefulness of common denominators in adding. Express sums as improper fractions or mixed numbers. 5 Minute Preview
Fraction Artist 2 (Area Models of Fractions)
Extend understanding of fractions by making modern paintings in the style of Piet Mondrian. Create and analyze paintings with different-sized sections. Compare the sizes of unit fractions. Find creative ways to color one-half of a painting. This can be a nice introduction to adding fractions with unlike denominators. 5 Minute Preview
Fractions Greater than One (Fraction Tiles)
Explore fractions greater than one with the Fractionator, a fraction-tile-making machine in the Gizmo. Create sums of fraction tiles on two number lines. Sums greater than one are shown as improper fractions on the top number line, and as mixed numbers on the bottom number line. 5 Minute Preview
Modeling Fractions (Area Models)
Model and compare fractions using area models. Set the denominators with the arrow buttons, and then set the numerators with the arrow buttons or by clicking in the models. Compare fractions visually, on a number line, or numerically using the least common denominator. 5 Minute Preview
2.5.3.I: : represent and solve multiplication of a whole number and a fraction that refers to the same whole using objects and pictorial models, including area models;
Multiplying Fractions
Multiply two fractions using an area model. Vary the vertical area to change one fraction and vary the horizontal area to change the other. Then examine the intersection of the areas to find the product. 5 Minute Preview
2.5.3.K: : add and subtract positive rational numbers fluently; and
Adding Fractions (Fraction Tiles)
Add fractions with the help of the Fractionator, a fraction-tile-making machine in the Gizmo. Model sums by placing the tiles on side-by-side number lines. Explore the usefulness of common denominators in adding. Express sums as improper fractions or mixed numbers. 5 Minute Preview
Adding Whole Numbers and Decimals (Base-10 Blocks)
Use base-10 blocks to model two numbers. Then combine the blocks to model the sum. Blocks of equal value can be exchanged from one area of the mat to the other to help understand carrying when adding. Four sets of blocks are available to model different place values. 5 Minute Preview
Fractions Greater than One (Fraction Tiles)
Explore fractions greater than one with the Fractionator, a fraction-tile-making machine in the Gizmo. Create sums of fraction tiles on two number lines. Sums greater than one are shown as improper fractions on the top number line, and as mixed numbers on the bottom number line. 5 Minute Preview
Fractions with Unlike Denominators
Find the sum or difference of two fractions with unlike denominators using graphic models. Find the least common denominator graphically. 5 Minute Preview
Modeling Fractions (Area Models)
Model and compare fractions using area models. Set the denominators with the arrow buttons, and then set the numerators with the arrow buttons or by clicking in the models. Compare fractions visually, on a number line, or numerically using the least common denominator. 5 Minute Preview
Subtracting Whole Numbers and Decimals (Base-10 Blocks)
Use base-10 blocks to model a starting number. Then subtract blocks from this number by dragging them into a subtraction bin. Blocks of equal value can be exchanged from one section of the mat to the other to help understand regrouping and borrowing. Four sets of blocks are available to model different place values. 5 Minute Preview
Sums and Differences with Decimals
Find the sum or difference of two decimal numbers using area models. Find the decimals and their sum or difference on a number line. 5 Minute Preview
2.5.4: : The student applies mathematical process standards to develop concepts of expressions and equations.
2.5.4.D: : recognize the difference between additive and multiplicative numerical patterns given in a table or graph.
Function Machines 1 (Functions and Tables)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Function Machines 3 (Functions and Problem Solving)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Pattern Flip (Patterns)
In the Pattern Flip carnival game, you are shown a pattern of cards. The first cards are face-up so you can see the pattern, and the rest are face-down. Can you guess which animals are on the face-down cards? Use one of the preset patterns, or make your own custom pattern. Good luck! 5 Minute Preview
3: : The student will demonstrate an understanding of how to represent and apply geometry and measurement concepts.
3.5.4: : The student applies mathematical process standards to develop concepts of expressions and equations.
3.5.4.H: : represent and solve problems related to perimeter and/or area and related to volume.
Area of Triangles
Use a dynamic triangle to explore the area of a triangle. With the help of an animation, see that any triangle is always half of a parallelogram (with the same base and height). Likewise, a similar animation shows the connection between parallelograms and rectangles. 5 Minute Preview
Balancing Blocks (Volume)
This Gizmo provides you with two challenges. First, use blocks to build a figure with a given volume. Then, try to balance the blocks on a platform that sits on the tip of a cone. The dimensions of the platform can be adjusted, and blocks can be added or deleted by clicking on the model. 5 Minute Preview
Chocomatic (Multiplication, Arrays, and Area)
Use the Chocomatic to design candy bars made out of chocolate squares. Use multiplication to find the number of squares in each chocolate bar. Build collections of chocolate bars that all have the same number of squares. Solve multiplication problems by joining two smaller chocolate bars into a large bar. 5 Minute Preview
Fido's Flower Bed (Perimeter and Area)
Construct models of gardens on a grid using squares of sod. Fence the gardens to find and compare perimeters. Work with pre-built gardens made of 36 squares each to compare perimeters of shapes with equal areas. 5 Minute Preview
Pyramids and Cones
Vary the height and base-edge or radius length of a pyramid or cone and examine how its three-dimensional representation changes. Determine the area of the base and the volume of the solid. Compare the volume of a skew pyramid or cone to the volume of a right pyramid or cone. 5 Minute Preview
3.5.5: : The student applies mathematical process standards to classify two-dimensional figures by attributes and properties.
3.5.5.A: : classify two-dimensional figures in a hierarchy of sets and subsets using graphic organizers based on their attributes and properties.
Classifying Quadrilaterals
Apply constraints to a quadrilateral, and then reshape and resize it. Classify the figure by its constraints. Explore the differences between the different kinds of quadrilaterals. 5 Minute Preview
3.5.6: : The student applies mathematical process standards to understand, recognize, and quantify volume.
3.5.6.A: : recognize a cube with side length of one unit as a unit cube having one cubic unit of volume and the volume of a three-dimensional figure as the number of unit cubes (n cubic units) needed to fill it with no gaps or overlaps if possible; and
Balancing Blocks (Volume)
This Gizmo provides you with two challenges. First, use blocks to build a figure with a given volume. Then, try to balance the blocks on a platform that sits on the tip of a cone. The dimensions of the platform can be adjusted, and blocks can be added or deleted by clicking on the model. 5 Minute Preview
Cannonball Clowns (Number Line Estimation)
Launch clowns from a circus cannon and try to hit the target. Drag digit cards on the control panel to set the launch distance and choose an appropriate unit of distance. After practicing your clown-launching skills on a number line, move on to the Big Top, Football Field, School Buses, the Golden Gate Bridge, and more! 5 Minute Preview
Pyramids and Cones
Vary the height and base-edge or radius length of a pyramid or cone and examine how its three-dimensional representation changes. Determine the area of the base and the volume of the solid. Compare the volume of a skew pyramid or cone to the volume of a right pyramid or cone. 5 Minute Preview
3.5.6.B: : determine the volume of a rectangular prism with whole number side lengths in problems related to the number of layers times the number of unit cubes in the area of the base.
Balancing Blocks (Volume)
This Gizmo provides you with two challenges. First, use blocks to build a figure with a given volume. Then, try to balance the blocks on a platform that sits on the tip of a cone. The dimensions of the platform can be adjusted, and blocks can be added or deleted by clicking on the model. 5 Minute Preview
Prisms and Cylinders
Vary the height and base-edge or radius length of a prism or cylinder and examine how its three-dimensional representation changes. Determine the area of the base and the volume of the solid. Compare the volume of an oblique prism or cylinder to the volume of a right prism or cylinder. 5 Minute Preview
3.5.7: : The student applies mathematical process standards to select appropriate units, strategies, and tools to solve problems involving measurement.
3.5.7.A: : solve problems by calculating conversions within a measurement system, customary or metric.
Cannonball Clowns (Number Line Estimation)
Launch clowns from a circus cannon and try to hit the target. Drag digit cards on the control panel to set the launch distance and choose an appropriate unit of distance. After practicing your clown-launching skills on a number line, move on to the Big Top, Football Field, School Buses, the Golden Gate Bridge, and more! 5 Minute Preview
3.5.8: : The student applies mathematical process standards to identify locations on a coordinate plane.
3.5.8.A: : describe the key attributes of the coordinate plane, including perpendicular number lines (axes) where the intersection (origin) of the two lines coincides with zero on each number line and the given point (0, 0); the x-coordinate, the first number in an ordered pair, indicates movement parallel to the x-axis starting at the origin; and the y-coordinate, the second number, indicates movement parallel to the y-axis starting at the origin;
City Tour (Coordinates)
Go sightseeing in fictional cities all over the world. Learn about coordinates on a graph by navigating around these cities on a grid-like city map. Some landmarks are shown on the map. For others, you are only given the coordinates. Can you find all of them? 5 Minute Preview
Elevator Operator (Line Graphs)
Operate an elevator in an old apartment building. Pick up and drop off residents where they want to go. A line graph shows where the elevator traveled over time. Operate the elevator either by using the standard up and down controls, or by building a graph to program where you want it to go. 5 Minute Preview
Function Machines 2 (Functions, Tables, and Graphs)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Function Machines 3 (Functions and Problem Solving)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Points in the Coordinate Plane
Identify the coordinates of a point in the coordinate plane. Drag the point in the plane and investigate how the coordinates change in response. 5 Minute Preview
Points, Lines, and Equations
Compare the graph of a linear function to its rule and to a table of its values. Change the function by dragging two points on the line. Examine how the rule and table change. 5 Minute Preview
3.5.8.B: : describe the process for graphing ordered pairs of numbers in the first quadrant of the coordinate plane; and
City Tour (Coordinates)
Go sightseeing in fictional cities all over the world. Learn about coordinates on a graph by navigating around these cities on a grid-like city map. Some landmarks are shown on the map. For others, you are only given the coordinates. Can you find all of them? 5 Minute Preview
Elevator Operator (Line Graphs)
Operate an elevator in an old apartment building. Pick up and drop off residents where they want to go. A line graph shows where the elevator traveled over time. Operate the elevator either by using the standard up and down controls, or by building a graph to program where you want it to go. 5 Minute Preview
Function Machines 2 (Functions, Tables, and Graphs)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Function Machines 3 (Functions and Problem Solving)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Points in the Coordinate Plane
Identify the coordinates of a point in the coordinate plane. Drag the point in the plane and investigate how the coordinates change in response. 5 Minute Preview
Points, Lines, and Equations
Compare the graph of a linear function to its rule and to a table of its values. Change the function by dragging two points on the line. Examine how the rule and table change. 5 Minute Preview
3.5.8.C: : graph in the first quadrant of the coordinate plane ordered pairs of numbers arising from mathematical and real-world problems, including those generated by number patterns or found in an input-output table.
City Tour (Coordinates)
Go sightseeing in fictional cities all over the world. Learn about coordinates on a graph by navigating around these cities on a grid-like city map. Some landmarks are shown on the map. For others, you are only given the coordinates. Can you find all of them? 5 Minute Preview
Elevator Operator (Line Graphs)
Operate an elevator in an old apartment building. Pick up and drop off residents where they want to go. A line graph shows where the elevator traveled over time. Operate the elevator either by using the standard up and down controls, or by building a graph to program where you want it to go. 5 Minute Preview
Function Machines 2 (Functions, Tables, and Graphs)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Function Machines 3 (Functions and Problem Solving)
Drop a number into a function machine, and see what number comes out! You can use one of the six pre-set function machines, or program your own function rule into one of the blank machines. Stack up to three function machines together. Input and output can be recorded in a table and on a graph. 5 Minute Preview
Points in the Coordinate Plane
Identify the coordinates of a point in the coordinate plane. Drag the point in the plane and investigate how the coordinates change in response. 5 Minute Preview
Points, Lines, and Equations
Compare the graph of a linear function to its rule and to a table of its values. Change the function by dragging two points on the line. Examine how the rule and table change. 5 Minute Preview
4: : The student will demonstrate an understanding of how to represent and analyze data and how to describe and apply personal financial concepts.
4.5.9: : The student applies mathematical process standards to solve problems by collecting, organizing, displaying, and interpreting data.
4.5.9.A: : represent categorical data with bar graphs or frequency tables and numerical data, including data sets of measurements in fractions or decimals, with dot plots or stem-and-leaf plots;
Mascot Election (Pictographs and Bar Graphs)
A brand new school is opening and it is time to elect the school mascot! Students can choose the Eagle, Lion, Bear, or Wolf. Voting results can be displayed in a table, tally chart, pictograph, bar graph, circle graph, or dot plot. You can change student votes by selecting a group of students and clicking a mascot. 5 Minute Preview
Reaction Time 1 (Graphs and Statistics)
Test your reaction time by catching a falling ruler or clicking a target. Create a data set of experiment results, and calculate the range, mode, median, and mean of your data. Data can be displayed on a list, table, bar graph or dot plot. The Reaction Time 1 Student Exploration focuses on range, mode, and median. 5 Minute Preview
Reaction Time 2 (Graphs and Statistics)
Test your reaction time by catching a falling ruler or clicking a target. Create a data set of experiment results, and calculate the range, mode, median, and mean of your data. Data can be displayed on a list, table, bar graph or dot plot. The Reaction Time 2 Student Exploration focuses on mean. 5 Minute Preview
4.5.9.B: : represent discrete paired data on a scatterplot; and
Graphing Skills
Create a graph (bar graph, line graph, pie chart, or scatter plot) based on a given data set. Title the graph, label the axes, and choose a scale. Adjust the graph to fit the data, and then check your accuracy. The Gizmo can also be used to create a data table based on a given graph. 5 Minute Preview
Trends in Scatter Plots
Examine the scatter plot for a random data set with negative or positive correlation. Vary the correlation and explore how correlation is reflected in the scatter plot and the trend line. 5 Minute Preview
4.5.9.C: : solve one- and two-step problems using data from a frequency table, dot plot, bar graph, stem-and-leaf plot, or scatterplot.
Graphing Skills
Create a graph (bar graph, line graph, pie chart, or scatter plot) based on a given data set. Title the graph, label the axes, and choose a scale. Adjust the graph to fit the data, and then check your accuracy. The Gizmo can also be used to create a data table based on a given graph. 5 Minute Preview
Mascot Election (Pictographs and Bar Graphs)
A brand new school is opening and it is time to elect the school mascot! Students can choose the Eagle, Lion, Bear, or Wolf. Voting results can be displayed in a table, tally chart, pictograph, bar graph, circle graph, or dot plot. You can change student votes by selecting a group of students and clicking a mascot. 5 Minute Preview
Reaction Time 1 (Graphs and Statistics)
Test your reaction time by catching a falling ruler or clicking a target. Create a data set of experiment results, and calculate the range, mode, median, and mean of your data. Data can be displayed on a list, table, bar graph or dot plot. The Reaction Time 1 Student Exploration focuses on range, mode, and median. 5 Minute Preview
Trends in Scatter Plots
Examine the scatter plot for a random data set with negative or positive correlation. Vary the correlation and explore how correlation is reflected in the scatter plot and the trend line. 5 Minute Preview
4.5.10: : The student applies mathematical process standards to manage one's financial resources effectively for lifetime financial security.
4.5.10.F: : balance a simple budget.
Road Trip (Problem Solving)
Plan a cross-country road trip through various U.S. state capitals. First choose a vehicle to drive, and then fill up the tank with gas and go! Find the range and gas mileage of each vehicle, and discover the shortest path between two cities. 5 Minute Preview
Correlation last revised: 9/16/2020
About STEM Cases
Students assume the role of a scientist trying to solve a real world problem. They use scientific practices to collect and analyze data, and form and test a hypothesis as they solve the problems.
Each STEM Case uses realtime reporting to show live student results.
Introduction to the Heatmap
STEM Cases take between 30-90 minutes for students to complete, depending on the case.
Student progress is automatically saved so that STEM Cases can be completed over multiple sessions.
Multiple grade-appropriate versions, or levels, exist for each STEM Case.
Each STEM Case level has an associated Handbook. These are interactive guides that focus on the science concepts underlying the case.
How Free Gizmos Work
Start teaching with 20-40 Free Gizmos. See the full list.
Access lesson materials for Free Gizmos including teacher guides, lesson plans, and more.
All other Gizmos are limited to a 5 Minute Preview and can only be used for 5 minutes a day.
Free Gizmos change each semester. The new collection will be available January 1 and July 1.
Find Your Solution
Start playing, exploring and learning today with a free account. Or contact us for a quote or demo.
Sign Up For Free Get a Quote