- Home
- Find Gizmos
- Browse by Standard (USA)
- Tennessee Standards
- Science: Chemistry I
Tennessee - Science: Chemistry I
Academic Standards | Adopted: 2022
CHEM1.PS1: : Matter and Its Interactions
CHEM1.PS1.1: : Obtain, evaluate, and communicate information to compare historical models of the atom (from Democritus to quantum model) and construct explanations to show how scientific knowledge evolves over time based on scientific evidence.
Bohr Model of Hydrogen
Shoot a stream of photons through a container of hydrogen gas. Observe how photons of certain energies are absorbed, causing the electron to move to different orbits. Build the spectrum of hydrogen based on photons that are absorbed and emitted. 5 Minute Preview
Bohr Model: Introduction
Fire photons to determine the spectrum of a gas. Observe how an absorbed photon changes the orbit of an electron and how a photon is emitted from an excited electron. Calculate the energies of absorbed and emitted photons based on energy level diagrams. The light energy produced by the laser can be modulated, and a lamp can be used to view the entire absorption spectrum at once. 5 Minute Preview
Boyle's Law and Charles's Law
Investigate the properties of an ideal gas by performing experiments in which the temperature is held constant (Boyle's Law), and others in which the pressure remains fixed (Charles's Law). The pressure is controlled through the placement of masses on the lid of the container, and temperature is controlled with an adjustable heat source. Gay-Lussac's law relating pressure to temperature can also be explored by keeping the volume constant. 5 Minute Preview
Ideal Gas Law
Explore relationships between amount, temperature, pressure, and volume for an ideal gas in a chamber with a moveable piston. Discover rules of proportionality contained in Boyle's law, Charles's law, Avogadro's law, and Gay-Lussac's law. Use these relationships to derive the ideal gas law and calculate the value of the ideal gas constant. 5 Minute Preview
Temperature and Particle Motion
Observe the movement of particles of an ideal gas at a variety of temperatures. A histogram showing the Maxwell-Boltzmann velocity distribution is shown, and the most probable velocity, mean velocity, and root mean square velocity can be calculated. Molecules of different gases can be compared. 5 Minute Preview
CHEM1.PS1.2: : Use the Periodic Table as a model to predict chemical and physical properties of main group elements (e.g., reactivity, number of subatomic particles, valence electrons, electronegativity, ion charge, ionization energy, and atomic radius) based on locations on the periodic table.
Electron Configuration
Create the electron configuration of any element by filling electron orbitals. Determine the relationship between electron configuration and atomic radius. Discover trends in atomic radii across periods and down families/groups of the periodic table. 5 Minute Preview
Element Builder
Use protons, neutrons, and electrons to build elements. As the number of protons, neutrons, and electrons changes, information such as the name and symbol of the element, the Z, N, and A numbers, the electron dot diagram, and the group and period from the periodic table are shown. Each element is classified as a metal, metalloid, or nonmetal, and its state at room temperature is also given. 5 Minute Preview
Periodic Trends
Explore trends in atomic radius, ionization energy, and electron affinity in the periodic table. Measure atomic radius with a ruler and model ionization energy and electron affinity by exploring how easy it is to remove electrons and how strongly atoms attract additional electrons. View these properties on the whole periodic table to see how they vary across periods and down groups. 5 Minute Preview
CHEM1.PS1.3: : Model different representations of atoms (e.g., Lewis Dot Structures, Bohr Models, electron configurations).
Bohr Model of Hydrogen
Shoot a stream of photons through a container of hydrogen gas. Observe how photons of certain energies are absorbed, causing the electron to move to different orbits. Build the spectrum of hydrogen based on photons that are absorbed and emitted. 5 Minute Preview
Bohr Model: Introduction
Fire photons to determine the spectrum of a gas. Observe how an absorbed photon changes the orbit of an electron and how a photon is emitted from an excited electron. Calculate the energies of absorbed and emitted photons based on energy level diagrams. The light energy produced by the laser can be modulated, and a lamp can be used to view the entire absorption spectrum at once. 5 Minute Preview
Covalent Bonds
Choose a substance, and then move electrons between atoms to form covalent bonds and build molecules. Observe the orbits of shared electrons in single, double, and triple covalent bonds. Compare the completed molecules to the corresponding Lewis diagrams. 5 Minute Preview
Electron Configuration
Create the electron configuration of any element by filling electron orbitals. Determine the relationship between electron configuration and atomic radius. Discover trends in atomic radii across periods and down families/groups of the periodic table. 5 Minute Preview
Element Builder
Use protons, neutrons, and electrons to build elements. As the number of protons, neutrons, and electrons changes, information such as the name and symbol of the element, the Z, N, and A numbers, the electron dot diagram, and the group and period from the periodic table are shown. Each element is classified as a metal, metalloid, or nonmetal, and its state at room temperature is also given. 5 Minute Preview
Molecule Builder
Create molecules using building blocks of carbon, hydrogen, oxygen, nitrogen, and other elements. Connect atoms by bonds, then create double or triple bonds if desired. For each completed molecule, write the chemical formula and, if the molecule is included in the database, observe the 3D structure. Create a variety of challenge molecules including cyclic molecules and isomers. 5 Minute Preview
CHEM1.PS1.4: : Use the periodic table and properties of elements to develop an explanation to predict the types of bonds that are formed between atoms.
Covalent Bonds
Choose a substance, and then move electrons between atoms to form covalent bonds and build molecules. Observe the orbits of shared electrons in single, double, and triple covalent bonds. Compare the completed molecules to the corresponding Lewis diagrams. 5 Minute Preview
Ionic Bonds
Simulate ionic bonds between a variety of metals and nonmetals. Select a metal and a nonmetal atom, and transfer electrons from one to the other. Observe the effect of gaining and losing electrons on charge, and rearrange the atoms to represent the molecular structure. Additional metal and nonmetal atoms can be added to the screen, and the resulting chemical formula can be displayed. 5 Minute Preview
Molecule Builder
Create molecules using building blocks of carbon, hydrogen, oxygen, nitrogen, and other elements. Connect atoms by bonds, then create double or triple bonds if desired. For each completed molecule, write the chemical formula and, if the molecule is included in the database, observe the 3D structure. Create a variety of challenge molecules including cyclic molecules and isomers. 5 Minute Preview
Electrons and Chemical Reactions - High School
The Secret Service has arrested suspects accused of counterfeiting coins from 1915 valued at $50,000 each. The students act as a forensic scientist to investigate the crime scene and examine the evidence. Students learn about electrons and chemical reactions to recreate the methods used to make the coins and prepare evidence for the court case. Video Preview
CHEM1.PS1.6: : Construct and use a model to show that atoms, and therefore mass, are conserved during a chemical reaction. Symbolically represent this by balancing chemical equations.
Balancing Chemical Equations
Balance and classify five types of chemical reactions: synthesis, decomposition, single replacement, double replacement, and combustion. While balancing the reactions, the number of atoms on each side is presented as visual, histogram, and numerical data. 5 Minute Preview
Chemical Changes
Chemical changes result in the formation of new substances. But how can you tell if a chemical change has occurred? Explore this question by observing and measuring a variety of chemical reactions. Along the way you will learn about chemical equations, acids and bases, exothermic and endothermic reactions, and conservation of matter. 5 Minute Preview
Chemical Equations
Practice balancing chemical equations by changing the coefficients of reactants and products. As the equation is manipulated, the amount of each element is shown as individual atoms, histograms, or numerically. Molar masses of reactants and products can also be calculated and balanced to demonstrate conservation of mass. 5 Minute Preview
Water Crisis - High School
There has been an outbreak of legionnaires’ disease in a small town. This disease is caused by legionella bacteria that proliferate in contaminated water supplies. Students take on the role of an environmental chemist to investigate the source of legionella and use stoichiometry to decontaminate the water supply and remediate the disease outbreak. Video Preview
CHEM1.PS1.7: : Perform stoichiometric calculations involving the following relationships: mole-mole; mass-mass; mole-mass; mole-particle; and mass-particle.
Moles
Understand the definition of a mole and determine the Avogadro constant by adding atoms or formula units to a balance until the mass in grams is equal to the atomic or formula mass. Manipulate a conceptual model to understand how the number of particles, the number of moles, and the mass are related. Then use dimensional analysis to convert between particles, moles, and mass. 5 Minute Preview
Stoichiometry
Solve problems in chemistry using dimensional analysis. Select appropriate tiles so that units in the question are converted into units of the answer. Tiles can be flipped, and answers can be calculated once the appropriate unit conversions have been applied. 5 Minute Preview
Water Crisis - High School
There has been an outbreak of legionnaires’ disease in a small town. This disease is caused by legionella bacteria that proliferate in contaminated water supplies. Students take on the role of an environmental chemist to investigate the source of legionella and use stoichiometry to decontaminate the water supply and remediate the disease outbreak. Video Preview
CHEM1.PS1.8: : Use models to show a qualitative understanding of the concept of percent yield, limiting reactants, and excess reactants in a chemical reaction.
Limiting Reactants
Explore the concepts of limiting reactants, excess reactants, and theoretical yield in a chemical reaction. Select one of two different reactions, choose the number of molecules of each reactant, and then observe the products created and the reactants left over. 5 Minute Preview
CHEM1.PS1.9: : Develop an explanation using the reactants in a chemical reaction to identify reaction type (i.e., synthesis, decomposition, combustion, single replacement, double replacement) and predict products.
Balancing Chemical Equations
Balance and classify five types of chemical reactions: synthesis, decomposition, single replacement, double replacement, and combustion. While balancing the reactions, the number of atoms on each side is presented as visual, histogram, and numerical data. 5 Minute Preview
Chemical Changes
Chemical changes result in the formation of new substances. But how can you tell if a chemical change has occurred? Explore this question by observing and measuring a variety of chemical reactions. Along the way you will learn about chemical equations, acids and bases, exothermic and endothermic reactions, and conservation of matter. 5 Minute Preview
Chemical Equations
Practice balancing chemical equations by changing the coefficients of reactants and products. As the equation is manipulated, the amount of each element is shown as individual atoms, histograms, or numerically. Molar masses of reactants and products can also be calculated and balanced to demonstrate conservation of mass. 5 Minute Preview
Electrons and Chemical Reactions - High School
The Secret Service has arrested suspects accused of counterfeiting coins from 1915 valued at $50,000 each. The students act as a forensic scientist to investigate the crime scene and examine the evidence. Students learn about electrons and chemical reactions to recreate the methods used to make the coins and prepare evidence for the court case. Video Preview
CHEM1.PS1.11: : Develop an explanation for the behavior of gases using the Kinetic Molecular Theory and the Combined Gas Law.
Boyle's Law and Charles's Law
Investigate the properties of an ideal gas by performing experiments in which the temperature is held constant (Boyle's Law), and others in which the pressure remains fixed (Charles's Law). The pressure is controlled through the placement of masses on the lid of the container, and temperature is controlled with an adjustable heat source. Gay-Lussac's law relating pressure to temperature can also be explored by keeping the volume constant. 5 Minute Preview
Ideal Gas Law
Explore relationships between amount, temperature, pressure, and volume for an ideal gas in a chamber with a moveable piston. Discover rules of proportionality contained in Boyle's law, Charles's law, Avogadro's law, and Gay-Lussac's law. Use these relationships to derive the ideal gas law and calculate the value of the ideal gas constant. 5 Minute Preview
Temperature and Particle Motion
Observe the movement of particles of an ideal gas at a variety of temperatures. A histogram showing the Maxwell-Boltzmann velocity distribution is shown, and the most probable velocity, mean velocity, and root mean square velocity can be calculated. Molecules of different gases can be compared. 5 Minute Preview
CHEM1.PS1.12: : Use the Ideal Gas Law (PV=nRT) to quantitatively evaluate the relationship among the number of moles, volume, pressure, and temperature for ideal gases.
Ideal Gas Law
Explore relationships between amount, temperature, pressure, and volume for an ideal gas in a chamber with a moveable piston. Discover rules of proportionality contained in Boyle's law, Charles's law, Avogadro's law, and Gay-Lussac's law. Use these relationships to derive the ideal gas law and calculate the value of the ideal gas constant. 5 Minute Preview
CHEM1.PS1.13: : Create models of solutions to describe solutes and solvents, concentration of solutions, and the process of solvation.
Titration
Measure the quantity of a known solution needed to neutralize an acid or base of unknown concentration. Use this information to calculate the unknown concentration. A variety of indicators can be used to show the pH of the solution. 5 Minute Preview
CHEM1.PS1.14: : Quantitatively analyze solutions to describe concentration using molarity, percent composition, and ppm.
Titration
Measure the quantity of a known solution needed to neutralize an acid or base of unknown concentration. Use this information to calculate the unknown concentration. A variety of indicators can be used to show the pH of the solution. 5 Minute Preview
Water Crisis - High School
There has been an outbreak of legionnaires’ disease in a small town. This disease is caused by legionella bacteria that proliferate in contaminated water supplies. Students take on the role of an environmental chemist to investigate the source of legionella and use stoichiometry to decontaminate the water supply and remediate the disease outbreak. Video Preview
CHEM1.PS1.16: : Obtain, evaluate, and communicate information to identify acids and bases as a special class of compounds due to their unique properties.
Titration
Measure the quantity of a known solution needed to neutralize an acid or base of unknown concentration. Use this information to calculate the unknown concentration. A variety of indicators can be used to show the pH of the solution. 5 Minute Preview
pH Analysis
Test the acidity of common substances using pH paper. Materials including soap, lemon juice, milk, and oven cleaner can be tested by comparing the color of pH strips to a standard scale. 5 Minute Preview
pH Analysis: Quad Color Indicator
Test the acidity of many common everyday substances using pH paper (four color indicators). Materials including soap, lemon juice, milk, and oven cleaner can be tested by comparing the color of the pH strips to the calibrated scale. 5 Minute Preview
Ocean Carbon Equilibrium - High School
Mussel farmers in the Arctic Ocean have reported problems with their mussels. They have noticed that the mussel shells have eroded and become brittle. Students take on the role of a marine chemist to analyze the changes to ocean carbon chemistry and equilibrium to determine the cause of the mussel shell erosion. Video Preview
CHEM1.PS1.17: : Use models to describe radioactive stability, radioactive decay, fusion, and fission.
Isotopes
Explore what isotopes are by adding protons and neutrons to the nucleus of an atom. Plot both stable and radioactive isotopes on a graph of neutrons vs. protons, and explore how the neutron:proton ratio of stable isotopes changes from lighter to heavier elements. 5 Minute Preview
Nuclear Decay
Observe the five main types of nuclear decay: alpha decay, beta decay, gamma decay, positron emission, and electron capture. Write nuclear equations by determining the mass numbers and atomic numbers of daughter products and emitted particles. 5 Minute Preview
Nuclear Reactions
Explore examples of nuclear fusion and fission reactions. Follow the steps of the proton-proton chain, CNO cycle, and fission of uranium-235. Write balanced nuclear equations for each step, and compare the energy produced in each process. 5 Minute Preview
CHEM1.PS1.18: : Develop and use models to compare alpha, beta, and gamma radiation in terms of mass, charge, and penetrating power. Identify examples of applications of different radiation types in everyday life.
Nuclear Decay
Observe the five main types of nuclear decay: alpha decay, beta decay, gamma decay, positron emission, and electron capture. Write nuclear equations by determining the mass numbers and atomic numbers of daughter products and emitted particles. 5 Minute Preview
CHEM1.PS3: : Energy
CHEM1.PS3.1: : Construct an explanation of thermal energy as a form of energy, and temperature as a measure of average kinetic energy of a group of particles.
Temperature and Particle Motion
Observe the movement of particles of an ideal gas at a variety of temperatures. A histogram showing the Maxwell-Boltzmann velocity distribution is shown, and the most probable velocity, mean velocity, and root mean square velocity can be calculated. Molecules of different gases can be compared. 5 Minute Preview
CHEM1.PS3.2: : Analyze and interpret data using heating/cooling curves and phase diagrams.
Phase Changes
Explore the relationship between molecular motion, temperature, and phase changes. Compare the molecular structure of solids, liquids, and gases. Graph temperature changes as ice is melted and water is boiled. Find the effect of altitude on phase changes. The starting temperature, ice volume, altitude, and rate of heating or cooling can be adjusted. 5 Minute Preview
CHEM1.PS3.3: : Analyze the energy changes involved in calorimetry by using the law of conservation of energy quantitatively (use of q=mcDeltaT) and qualitatively.
Calorimetry Lab
Investigate how calorimetry can be used to find relative specific heat values when different substances are mixed with water. Modify initial mass and temperature values to see effects on the system. One or any combination of the substances can be mixed with water. A dynamic graph (temperature vs. time) shows temperatures of the individual substances after mixing. 5 Minute Preview
CHEM1.PS3.5: : Analyze data to explain how energy is absorbed or given off depending on the bonds formed and broken.
Feel the Heat
Have you ever used a glove warmer to keep your hands warm? How about an instant cold pack to treat an injury? In the Feel the Heat Gizmo, create your own hot and cold packs using various salts dissolved in water and different bag materials. Learn about exothermic and endothermic processes and how energy is absorbed or released when bonds are broken and new bonds form. 5 Minute Preview
Reaction Energy
Exothermic chemical reactions release energy, while endothermic reactions absorb energy. But what causes some reactions to be exothermic, and others to be endothermic? In this simulation, compare the energy absorbed in breaking bonds to the energy released in forming bonds to determine if a reaction will be exothermic or endothermic. 5 Minute Preview
Correlation last revised: 5/19/2025
About STEM Cases
Students assume the role of a scientist trying to solve a real world problem. They use scientific practices to collect and analyze data, and form and test a hypothesis as they solve the problems.
Each STEM Case uses realtime reporting to show live student results.
Introduction to the Heatmap
STEM Cases take between 30-90 minutes for students to complete, depending on the case.
Student progress is automatically saved so that STEM Cases can be completed over multiple sessions.
Multiple grade-appropriate versions, or levels, exist for each STEM Case.
Each STEM Case level has an associated Handbook. These are interactive guides that focus on the science concepts underlying the case.
How Free Gizmos Work
Start teaching with 20-40 Free Gizmos. See the full list.
Access lesson materials for Free Gizmos including teacher guides, lesson plans, and more.
All other Gizmos are limited to a 5 Minute Preview and can only be used for 5 minutes a day.
Free Gizmos change each semester. The new collection will be available January 1 and July 1.
Find Your Solution
Start playing, exploring and learning today with a free account. Or contact us for a quote or demo.
Sign Up For Free Get a Quote